Product

Home/Product

Baltes OmegaPRO

ID：Baltes OmegaPRO

Model: Total height approx. 34 cm plus rubber toe cap to protect the upper leather

Features

- Model: Total height approx. 34 cm plus rubber toe cap to protect the upper leather
- Upper: Waterproof leather, high-quality waterrepellent finish, comfortable padding of the entire upper area
- Lining: DRY BEST functional lining with HYDROplus
- Sole: Nitrile rubber shell sole with air chamber damping
- Insole: ERGOLINE FW health insole
- Plus: NOMEX upper seams
- Plus: integrated BALTES climatic system
- Plus: BALTES BACK MOTION element
- Plus: BALTES MOTION element
- Plus: MONDOPOINT multi-width system – 5 widths
- Sizes: 240 - 315 (38 - 48)
- Widths: 9 - 13
- Waterproof leather
For its shoes and boots, BALTESR only uses water-repellent, high-quality, smooth waterproof leather that is particularly breathable and which distinguishes itself through a high water vapour permeability.
- Nomex upper seams
The BALTESR firemen’s boots are manufactured with flame-retardant, water-repellent and particularly hard-wearing NomexR upper seams.
- Safety reflectors
The safety reflectors on the outside are flame retardant in accordance with DIN EN 471, DIN EN 533 and DIN EN 469, and they provide safety in the darkness.
- BALTES MOTION ELEMENT
The specially designed BALTES (Front) Motion Element increases freedom of movement in the instep and supports the natural movement of the foot.
- Pull-on loops
Pull-on loops at the side or back with special reinforcement allow you to put on your boots quickly in an emergency start. The reinforcement makes them extremely resistant to breaking. BALTES guarantees a breaking load (maximum tensile load) of ≥ 1000 N.
- DRY BEST lining
DRY BESTR is a high-tech lining material that absorbs body moisture actively and automatically. By using the new special fibre HYDROplusR, the lining can absorb 40 times its own weight in moisture. Besides that, the DRY BESTR lining material is permanently anti-bacterial. A special layer in the lining prevents the formation of bacteria and fungus.
- Rubber toe cap
The rubber toe cap serves to additionally protect the upper leather from scuffing. The countersunk seams increase the durability of the boot. The rubber quality used by BALTES is additionally oil and petrol resistant as well as antistatic.
- Nitrile rubber sole for firemen's boots
The antistatic, non-chalking and very hard-wearing nitrile rubber steel sole is equipped with a selfcleaning tread that has course cleats and is 6 mm high. The outsole is resistant to oil and petrol and it has an excellent insulation against cold and heat thanks to an additional natural rubber bottom filling. The straight front of the heel, the large tread area in the ball zone and the additional tread in the joint give a perfect hold on ladders.]
- Air chamber damping
Good damping properties through special integrated air chambers in the sole-heel zone plus the light weight relax the step. The air chamber system absorbs the shocks caused when the heel impacts on hard surfaces. It makes the step nice and soft and relieves the joints, spine and discs.

Back