CAR STANDARD 2 Fire Blanket (Single use)
ID：Bridgehill Car Standard 2-
Bridgehill Car Standard 2
(Single use)
Product information
Size/Weight： Standard 2：±6 x 8 m ±27 ㎏
Core material：
Heat exposure zones: Pyroxene fabric
Fabric blend, long sides: Silica, Alumina, Calcium oxide and Boron oxide
Coating： Each side of the fabric is coated with BridgeTech™ polymer coating
Standard Car sizes：Handles vehicles up to standard SUV sizes like Land Rover, Volvo XC90 etc.
Main usage： ◇ Fossil fuel vehicles ◇ Electric/ hybrid vehicles
Smartbag： Airtight bag. Apply the included silicone grease to the zipper to maintain airtightness.
Technical specification
Service temperatureson core fabrics Peak temperature Working temperature Pyroxene fabric ±1600℃ ±800℃ Silica, Alumina, Calcium oxide and Boron oxide ±1100℃ ±550℃ Bridgehill Fire Blanket Obtained Certification
NFPA 701:2019+I
EN 13501-1: Reaction to fire classification A1
EN ISO 1182 Non-combustibility test
EN ISO 1716 Determination of the gross heat of combustion
How to use
Step 1：Place the fire blanket on the ground. Center it in front of or behind the car and roll it out.
Step 2：Two people should grab each their handle and safely pull the fire blanket over the car in one continuous movement.
Step 3：Make sure the fire blanket is tight all the way to the ground and leave the fire blanket. Wait for firefighters to assess the situation further.
ALWAYS CALL THE FIRE DEPARTMENT!
-
The Bridgehill EV Fire Blanket
How to use a car fire blanket - emergency version
-
